TM 5-5420-202-34
ENGINE REPLACEMENT
Accessory Drive Installation On Unserviceable Engine (Sheet 3 of 7)
8.
Place check valve (K) in position on
bracket (G).
Install bolt (L) and washer (M) in lower
9.
hole of check valve (K) to secure to
bracket (G).
10.
Install bolt (L), two washers (M), and
clamp (N) into upper hole of check valve
(K) .
Using 7/16 inch socket, tighten
11.
two bolts (L).
Using 7/8 inch wrench, install tube assembly (P) between fuel pump (Q) and fuel check
12.
valve (K).
13.
Using 5/8 inch wrench, install tube assembly
on check valve (K).
Go on to Sheet 4
3-52