TM 5-5420-202-34
ENGINE REPLACEMENT
Replacement Engine Installation (Sheet 10 of 17)
Keep personnel clear and out from under lifting device during lifting
Failure to do so could result in personnel being struck and
operation.
seriously injured.
Using transmission sling and a suitable hoist (transmission weighs approximately 3,000
4.
pounds), aline transmission dowel pins with engine and carefully advance transmission until
transmission mounting flange is in contact with engine transmission adapter.
Using fabricated wrench and 5/8 inch socket,
5.
install and tighten screw (E), washer (F), and
nut (G) on left and right side of
transmission/engine.
6.
Using fabricated wrench or 5/8 inch
wrench, install and tighten 17 screws
(H), lockwashers (J), and flat washers
(K) securing transmission to engine
flange.
`7.
Remove transmission sling from transmission.
Go on to Sheet 11
3-66
