TM 5-5420-202-34
POWER/MASTER CONTROL PANEL HARNESS REPLACEMENT (Sheet 2 of 8)
REMOVAL:
1.
Using spanner wrench, disconnect connector (A) at master relay.
2.
Follow branch of harness assembly (B)
back along voltage regulator mounting
bracket (C).
Using 7/16 inch socket, remove screws
3.
(D) and lockwashers (E) securing tops
of two straps (F) that retain harness
assembly (B).
4.
Using spanner and adjust able wrenches,
disconnect connector (G) from intercon-
necting box cable (H).
Go on to Sheet 3
