TM 5-5420-209-12
Figure 2-31. Bay Ground Recovery (Sheet 3 of 4).
NOTE
If cable guide hole does not aline with locking cylinder pin, raise or lower boom as needed or move trans-
porter to level ground and try again.
(19) Engage (PIN IN) cylinder pin (8).
CAUTION
Before moving transporter ensure aft tiedown hooks are engaged with bay tiedown pins.
(20) Install quick release pin (7).
(21) Ensure all travel and foldlock latches on bay are secured (latched).
(22) Tighten bolt (3) on tiedown hook (4). Repeat for remaining tiedown hook (4).
2-111
