TM 5-5420-209-12
4-21. Clearance and Marker Lights Electrical Leads and Clamps. - Continued
b“ Repair. (figure 4-8)
(1) Inspect clearance and marker light wiring and connectors.
(2) Replace damaged or missing connectors.
(3) Replace wiring if insulation is cracked, burnt, oro therwise damaged.
(4) When replacing wiring, observe the following:
(a) Ensure power to clearance and marker lights is removed.
(b) Remove all cable clamps securing wiring to be replaced.
(c) Tag wiring to ensure proper installation of new wiring or connectors.
4-50
