TM 5-5420-209-12
4-23. Throttle Control.
This task covers: Replace
INITIAL SETUP
ToolS
General Mechanic’s
(Item 1, Appendix
Automotive Tool Kit
B)
a. Replace. (figure 4-10)
(1)
(2)
(3)
(4)
(5)
(6)
(7)
Trace throttle control (1) from cab protector (2) to engine compartment of transporter and remove all clamps
securing throttle control (1).
Loosen screw (3) and remove connector (4) from throttle control (1).
Remove nut (5), lockwasher (6), and remove throttle control (1) from cab protector (2).
Install throttle control (1) in cab protector (2).
Install nut (5) and lockwasher (6) on throttle control (1) and tighten nut (5).
Route throttle control (1) to engine compartment and secure with clamps to transporter.
Install throttle control (1) through bracket (7) and install connector (4) on throttle control (1) and tighten screw
(3).
4-54
