TM 5-5420-209-12
4-29. Rear Winch Assembly. - Continued
(12) Remove two pipe plugs (22).
(13) Mark spring cover (23), primary drive housing (24) and motor (25) to ensure proper orientation during reas-
sembly.
NOTE
Care must be used to ensure that the spring cover (23) is removed evenly.
(14) Loosen, but do not remove 12 screws (26).
(15) Mark location of 12 brake springs (27).
(16) Remove l2screws (26) and washers (28) and remove spring cover (23), springs (27), packing (29), ring (30),
packing (31), motor (25), and spacer (32).
(17) Remove brake subassembly (33).
(18) Remove primary sun gear (34) and roller bearing (35).
(19) Remove garter spring (36), sixteen cam locks (37), and one cam lock (38), and garter spring (39).
(20) Remove retaining ring (40) and brake hub (41).
(21) Remove retaining ring (42), roller bearing (43), and spacer (44).
(22) Remove retaining ring (45) and brake ring (46).
(23) Remove retaining ring (47) and brake plate (48).
4-78
