TM 5-5420-209-12
4-29. Rear Winch Assembly. - Continued
(53)
(54)
(55)
(56)
(57)
(58)
(59)
(60)
(61)
(62)
Install seal ring (21) on sun gear shaft (18).
Lubricate preformed packing (20) and install on seal ring (21).
Install retaining ring (19).
Install sun gear shaft (18).
Press bearing (13) into gear (11) until just below face of gear (11).
Install gear (11) in final planet hub (12) and install shaft (10).
Aline holes in shaft (10) and final planet hub (12).
Install pin (9) in final planet hub (12) and shaft (10) until pin (9) is 0.4375 in. (1.1112 cm) below surface of
final planet hub (12).
Repeat Steps (57) through (60) for remaining gears.
Ensure gears rotate freely.
4-92
