TM 5-5420-209-12
4-30. Winch Motor Assembly (Used On Winch Model 11-S-EC).
This task covers:
a. Replace
b. Disassembly
d. Reassembly
e. Installation
C. Repair
INITIAL SETUP
Tool
Equipment Condition
General Mechanic’s Automotive Tool Kit
Winch assembly removed (para. 4-28).
(Item 1, Appendix B)
Materials/Parts
Solvent, Dry Cleaning (Item 18, Appendix E)
Grease, Automotive and Artillery (Item 2, Appendix E)
Rags, Wiping (Item 12, Appendix E)
a. Removal. (figure 4-26)
(1)
Remove pipe plugs (1) and (2) and drain hydraulic fluid into a suitable container.
(2) Mark orientation of cover(3) with respect to motor (4) and housing (5).
CAUTlON
Spring cover must be removed evenly to prevent damage to cover. Remove screws securing cover in
an even pattern.
(3) Loosen but do not remove 11 screws (6) and washers (7) securing cover(3).
(4) Note placement of springs (8) before removing cover(3).
(5) Remove 12 screws (6), washers(7), and remove cover (3), springs (8), packing (9), ring (10), packing (11),
and motor (4).
4-116
