TM 5-5420-209-12(13) Install wear plate (10), rotor assembly (9) with counter bore in rotor down.(14) Install manifold plate (6), commutator ring (4), commutator (5), and seal ring (7) with flat side out.(15) Install seal ring (15) on housing (26).(16) Install seal ring (3) on cover (2).(17) Apply a generous amount of oil to both ends of sleeve (14) and install.(18) lnstall cover (2) and secure with seven screws (1). Torque screws to 45-50 in.-lbs (5-5.6 Nm).Figure 4-32. Winch Motor, Reassembly.4-131
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
