Winch Motor Assembly (Used on Winch Model PG-115-043R)

TM-5-5420-209-12 Cargo Pallet Ribbon Bridge Transporter (NSN 5420-01-008-7436) Manual
Page Navigation
319

TM 5-5420-209-12 4-31. Winch Motor Assembly (Used on Winch Model PG-115-043R). This task covers: a. Replace d. Reassembly b. Disassembly e. Installation c. Repair INITIAL SETUP Tools Equipment Condition General Mechanic’s Automotive Tool Kit Bay removed (para. 2-16) (Item 2, Appendix E) Seal Compression Ring (Item 5, Appendix B) Seal Thimble (Item 6, Appendix B) Seal Driver (Item 7, Appendix B) Materials/Parts Grease, Automotive and Artillery Solvent, Dry Cleaning (Item 18, Appendix E) Rags, Wiping (Item 12, Appendix E) Gasket, Winch Motor (P/N 008-10056-1) a. Removal. (figure 4-30) WARNING When disconnecting any hydraulic line, open line slowly and protect face, as hydraulic oil may spray out due to residual pressure in system. (1) Tag and disconnect hydraulic lines (1) and (2) from winch motor (3). (2) Remove four screws (4) and washers (5) and remove winch motor (3) and gasket (6). 4-126

Privacy Statement
Press Release
Contact