TM 5-5420-209-12
4-31. Winch Motor Assembly (Used on Winch Model PG-115-043R). - Continued
b. Disassembly. (figure 4-31)
(1) Remove 7 srews (1) and remove cover (2) and seal (3).
(2) Remove commutator ring (4), commutator (5), and manifold (6).
(3) Remove seal ring (7) from manifold (6).
(4) Remove manifold plate (8).
NOTE
The mtor assembly is a matched set. After removal, mark end of assembly to ensure proper orientation
during reassembly.
(5) Remove rotor assembly (9).
(6) Remove wear plate (10).
(7) Remove drive link (11).
(8)
Remove bearing (12) and coupling shaft (13).
(9) Remove housing (14) and seal ring (15).
(10) Remove seal (16), ring (17), washer, (18) washer (19) and seal (20).
NOTE
Perform next step only if items are to be replaced due to wear or other damage.
(11) Remove bearing (21), washer (22), bearing (23), washer (24), and washer (25) from
housing (26).
4-128