TM 5-5420-209-12
4-40. Pins and Clevis.
This task covers: Replace
INITIAL SETUP
Tools
Equipment Condition:
General Mechanics Automotive Tool Kit
Bay removed (para. 2-16).
(Item 1, Appendix B)
Wrench, Torque (NSN 5120-00-640-6364) (Item 2, Appendix B)
a. Replace. (figure 4-45)
NOTE
Boom should be fully lowered.
CAUTION
Secure hydraulic cylinder by blocking or other suitable means before removing pin.
(1) Remove retaining rings (1) and clevis pin (2).
(2) Tilt piston (3) away from boom (4) and unscrew clevis (5) from piston rod (6).
(3) Screw clevis (5) onto piston rod (6). Torque clevis to 100-150 ft-lbs (135-203 Nm).
(4) Align piston (3) and clevis (5) with struts or boom (4) and secure with clevis pin (2) and retaining rings (1).
(5) Repeat Steps (4) and (5) for remaining clevis.
4-156