TM 5-5420-209-12
4-42. Pins and Arm.
This task covers: Replace
INITIAL SETUP
Tools
Equipment Condition:
General Mechanic’s Automotive Tool Kit
Bay removed (para. 2-16).
(Item 1, Appendix B)
a. Replace. (figure 4-47)
(1) Remove cotter pin (1) and remove pin (2) and cylinder locking pin (3).
(2) Support cylinder (4), remove cotter pin (5) and pin (6) from clevis (11).
(3) Remove cotter pin (7) and remove pin (8) and arm (9).
(4) Install arm (9) in support (10) and secure with pin (8) and cotter pin (7).
(5) Align arm (9) with clevis (11) and secure with pin (6) and cotter pin (5).
(6) Install locking pin (3) and secure with pin (2) and cotter pin (1).
4-160
