ARMY TM 5-5420-212-10-1
MARINE CORPS TM 08676A-10/1-1
LRS 2
(5)
Place capsill and jacking brackets on load.
(a)
Place capsill centrally on frame cross girder with capsill inside frame cross girder side members.
(b)
Ensure front end of capsill is flush with front end of pallet.
(c)
Ensure the pulley end of jacking brackets face each other and pulleys face up.
LRS 2
(6)
Place two rocking rollers on capsill.
(a)
Ensure that rollers are pinned to capsill with nose pins and secured with retainer clips.
(b)
Ensure that rollers are in down (locked) position.
3-118
