ARMY TM 5-5420-212-10-1
MARINE CORPS TM 08676A-10/1-1
(8)
Remove bays 11, 10 and 9.
(9)
Boom bridge to panel point 4p5.
(10) Remove bay 8.
(11) Remove deck unit from next to last deck unit recess of bay 7.
(12) Remove bays 7, 6 and 5.
(13) Refit bankseat beam to end of bay 4 top panels. DO NOT put a panel pin through bankseat beam and
top panels.
(14) Boom bridge to panel point 1po.
(15) Position building pedestals under girders about 15 ft (4.6 m) behind roller beam.
WARNING
Do not attempt to disassemble the nose without counterweight top panels and deck units,
otherwise injury to personnel and damage to equipment will occur.
(16) To add counterweight.
5-37
