TM 5-5420-22620-2
POWERPLANT REPLACEMENT (Sheet 1 of 21)
PROCEDURE INDEX
PROCEDURE
PAGE
I
Removal
Installation
TOOLS:
9/16 in. socket with l/2 in. drive
7/16 in. socket with 1/2 in. drive
Ratchet with 1/2 in. drive
Flat-tip screwdriver
Long round nose pliers
7/16 in. combination box and open end wrench
11/16 in. combination box and open end wrench
7/8 in. combination box and open end wrench
7/8 in. crowfoot with 3/8 in drive
Diagonal cutting pliers
3/4 in. socket with 1/2 in. drive
Spanner wrench
Pinch bar
5 in. extension with 1/2 in. drive
1-1/2 in. socket with 3/4 in. drive
Ratchet with 3/4 in. drive
Universal joint with 1/2 in. drive
Hammer
Torque wrench with 3/8 in. drive (0-600 lb-in) (0-68 N-m)
Torque wrench with 1/2 in. drive (0-175 lb-ft) (0-237 N-m)
Torque wrench with 3/4 in. drive (0-600 lb-ft) (0-813 N-m)
Adjustable wrench
5 ton hoist capable of lifting powerplant 12 ft. high
SPECIAL TOOLS: Final drive guide shields (Fig. F-1, Appendix F) (2 required)
Final drive adapter hook-up tool (Fig. F-4, Appendix F)
Engine and transmission sling (Item 31, Chapter 3, Section I)
SUPPLIES:
Covers tor fire extinguisher flexible tubing
Covers for hydraulic brake line openings
Covers for fuel lines openings
Covers for air cleaner hoses and outlets
Grease (Item 37, Appendix D)
Lockwire (Item 61, Appendix D)
Light rope (or heavy masking tape)
Cotter pins
Wooden blocks 12 in. x 12 in.
Lock washers
PERSONNEL: Three
`REFERENCE:
. NOTE
Use suitable container to catch fuel whenever any fuel
line or connection is loosened or disconnected. Use cloth
to wipe any spillage. Discard cloth and drained fuel in
accordance with local procedures,
Go on to Sheet 2
Change 4
