TM 5-5420-226-20-2
TRANSMISSION OIL COOLER REPLACEMENT (Sheet 9 of 10)
15.
Remove drip pan or rags from under cooler
connectors.
16.
Remove plastic barrier material and masking
tape from ends of hose (M) and transmission
connector (N).
17.
Using 1-5/8 inch wrench, install hose
(M) to transmission connector (N).
18.
Remove plastic barrier material and masking tape from ends of hose (P) and transmission
connector (Q).
19.
Using 1-5/8 inch wrench, install hose
(P) to transmission connector (Q)e
Using rags, wipe up oil which may
have dripped or leaked during oil
cooler replacement.
Remove cover from turbosupercharger
air inlet port.
Position clamp and air inlet hose
onto elbow (R).
Using screwdriver, tighten screw
(s).
Go on to Sheet 10
TA107516
6-46