TM 5-5420-226-20-2
ENGINE OIL COOLER SCREEN REPLACEMENT (Sheet 1 of 2)
TOOLS: 1/2 in. socket with 1/2 in. drive
Ratchet with 1/2 in. drive
5 in. extension with 1/2 in. drive
Remove powerplant (page 5-2)
PRELIMINARY
PROCEDURES:
REMOVAL:
1.
Using socket with extension through harness
and into bracket (A), remove two screws
and lockwashers (B).
2.
Pull harness and bracket (A) to right side
of oil cooler screen for access to screws
(c).
Using socket, remove four screws and
3.
lockwashers (C).
4.
Lift away cooler screen.
INSPECTION:
1.
Check screen and brackets for cracks,
tears, bending, and dents.
2.
Replace bad parts.
TA107520
Go on to Sheet 2