TM 5-5420-226-20-2
TRANSMISSION OIL COOLER REPLACEMENT (Sheet 6 of 10)
INSTALLATION:
NOTE
Installation procedures are the same for the right and left
coolers except that the upper rear mount bolt on the right
cooler additionally secures support bracket (A).
CAUTION
Two persons are required to support oil cooler to keep it
from falling while doing steps 1 thru 3.
1.
Position oil cooler and oil cooler
screen mounting bracket (B) into
place on oil cooler frame.
Start threads of four screws with
2.
lockwashers (C) by hand to hold
oil cooler and oil cooler screen
mounting bracket in place.
Using 3/4 inch wrench, tighten screws
3.
and lockwashers (C).
Position oil cooler screen into place on
4.
an oil cooler.
Start threads of two screws and lockwashers
5.
(D) by hand to hold screen in place.
TA107513
Go on to Sheet 7