TM 5-5420-226-20-2
AIR CLEANER TURBOCHARGER ELBOW REPLACEMENT (Sheet 2 of 3)
REMOVAL:
1. Pull pin (A) and release quick release clamp
(B)
2. Remove quick release clamp (B) from hose and
elbow.
3, Using socket, loosen nut (C) securing clamp (D).
4. Remove hose assembly (E).
5. Remove clamp (D).
6. Cover air cleaner outlet elbow (F) and turbosupercharger inlet elbow (G) with rags to prevent entrance of
foreign matter.
7. Using socket with extension and wrench, remove
eight nuts, lockwashers, and flat washers (H)
securing elbow (G) to turbocharger,
8. Remove elbow (G) and gasket (J). Throw gasket (J)
away.
9. Make sure turbocharger inlet mating surface is
not nicked, burred, or damaged. If turbocharger
inlet mating surface is damaged, notify support
maintenance. Make sure eight nuts and studs are
not stripped or damaged. Repair as necessary.
Change 4