TM 5-5420-226-20-2
ENGINE OIL FILTER ELEMENT REPLACEMENT (Sheet 5 of 5)
Install filter cover (D), making sure hole
3.
(E) is at the top.
Using 9/16 inch socket, remove screws
4.
from hole (F).
Using 9/16 inch socket, install ten self-
5.
locking nuts (G) and washers to secure
cover. Do not overtighten as stripping
may result.
Install screw and new sealing washer in cover at hole (E) and using socket, torque to not
6.
more than 150 lb-in (17 N*m).
Using wrench, turn screw (H) to right until tight.
7.
Connect fire extinguisher line (page 5-21, step 56).
8.
Check for leaks.
9.
10.
Install upper engine access cover (page 17-15).
11.
Replace engine oil (LO 5-5420-226-12).
End of Task
TA107549
6-80