TM 5-5420-226-20-2
AIR CLEANER INTAKE AND HOSE REPLACEMENT (Sheet 4 of 5)
INSTALLATION :
Position screen (A) with gaskets (B) over studs onto flange (C).
1.
Position intake (D) over studs onto flange (C).
2.
Install six nuts and washers (E) to secure intake (D),
3.
screen (A), and flange (C). Use a 9/16 inch socket
and universal socket, tighten nuts (E).
4.
Position hose (F) and clamp (G) onto flange (C).
Use a 3/8 inch wrench and tighten nut (H) on clamp
(G) securing hose (F) to flange (C).
5. Position intake (D) and flange (C) (assembled in steps
1 through 4 above), with flange (C) toward engine,
over studs on bulkhead.
6. Install eight washers and nuts (J) to secure intake
and flange to bulkhead. Use a 9/16 inch socket and
tighten nuts (J).
TA107674
Go on to Sheet 5
