TM 5-5420-226-20-2
FUEL TANKS (LEFT AND RIGHT) LEVEL GAGE TRANSMITTER REPLACEMENT (Sheet 4 of 4)
Using screwdriver, install five screws and
6.
fuel tank.
Secure screws (F) with lockwire (G).
7.
Connect electrical connector (H) to
8.
transmitter (C).
Check fuel gage for proper operation
9.
NOTE
Steps 10 thru 16 apply only to the right
fuel gage transmitter.
Place cover (J) in position over
10.
transmitter (C).
Position safety chain (K) on bracket (L)
11.
and secure bracket with two bolts (M),
Install bolt (Q) and lockwasher (R) to
12.
cover (J).
Using 1/2 inch socket, tighten three bolts
13.
(M and Q) securing cover (J) to fuel tank.
Place clamp (S) around hose.
14.
Install screw (T), clamp (S), lockwasher
15.
(U), and nut (V) securing clamp to bracket
(L).
Using 7/16 inch open end wrench to hold
16.
nut (V) and use 7/16 inch socket to tighten
screw (T).
17.
18.
TA107736
End of Task