TM 5-5420-226-20-2
MANIFOLD HEATER INPUT SOLENOID VALVE AND FUEL LINE REPLACEMENT (Sheet 7 of 10)
Input Solenoid Valve Replacement (Sheet 2 of 5)
NOTE
use suitable container to catch fuel that may leak whenever
any part of fuel system is loosened or disconnected.
REMOVAL:
Disconnect electrical lead (A) from solenoid valve (B).
1.
Using 7/16 inch and 1/2 inch wrenches, disconnect
2.
two fuel lines (C) from tee (D).
Using 1/2 inch and 5/8 inch wrenches, remove
3.
fuel line (E) from adapter (F).
Using 5/16 inch wrench, remove two screws and
4.
washers (G).
5.
Using screwdriver, remove two screws (H) with
lockwashers and flat washers. Throw lockwashers
away.
Remove solenoid valve (B), fuel filter (J), and attached
6.
fittings as a unit.
Go on to Sheet 3
TA107876
7-269