TM 5-5420-226-20-2
MANIFOLD HEATER INPUT SOLENOID VALVE AND FUEL LINE REPLACEMENT (Sheet 10 of 10)
Input Solenoid Valve Replacement (Sheet 5 of 5)
7.
Position solenoid valve (B) and fuel filter (E)
with attached fittings to brackets on engine.
Install two screws (H) with new lockwashers
8.
and flat washers to secure fuel filter (E)
to engine bracket. Using screwdriver, tighten
screws.
Install two screws and washers (J) to secure
9.
solenoid valve (B) to bracket. Using 5/16 inch
wrench, tighten screws.
10.
Connect two fuel lines (K) to tee (C). Using
7/16 inch wrench, tighten fuel line nuts.
Connect hose assembly (L) to adapter (M). Using
11.
1/2 inch and 5/8 inch wrenches, tighten hose
nut to adapter.
Connect electrical lead (N) to solenoid valve (B).
12.
13.
Operate purge pump (TM 5-5420-226-10). Check
for leaks. If leaks are found, tighten connec-
tions as required.
Install powerplant (page 5-14).
14.
End of Task
TA107879
7-272