TM 5-5420-226-20-2
FUEL LINES REPLACEMENT - ENGINE COMPARTMENT PRIMER PUMP LINES (INLET) (OUTLET)
(Sheet 1 of 11 )
PROCEDURE INDEX
PAGE
PROCEDURE
Removal
Installation
Ratchet with 1/2in. drive
TOOLS:
7/16 in. socket with 1/2 in. drive
9/16 in. socket with 1/2 in. drive
5/8 in. combination box and open end wrench (2 required)
1/2 in. combination box and open end wrench
7/8 in. combination box and open end wrench
9/1 6 in. combination box and open end wrench
11/1 6 in. combination box and open end wrench
7/16 in. combination box and open end wrench
1 in. combination box and open end wrench (2 required)
1-1/4 in. combination box and open end wrench
1 in. crowfoot wrench with 1/2 in. drive
10 in. adjustable wrench
5 in. extension with 1/2 in. drive
SUPPLIES:
Clean rags
REFERENCE: TM 5-5420~226-10
Remove powerplant (page 5-2)
PRELIMINARY PROCEDURES:
Drain fuel tanks (page 7-191)
TA107922
Go on to Sheet 2
