TM 5-5420-226-20-2
ACCELERATOR CONTROL ROD REPLACEMENT (Sheet 3 of 5)
Using pliers, remove three woodruff keys (R) from control rod (D).
9.
CLEANING AND INSPECTION:
WARNING
Cleaning agent specified is flam-
mable. Use only in well ventilated
areas. Keep away from flames,
sparks, or heat. Do not smoke
while using. Prevent contact with
eyes, mouth, and/or skin. Wear
rubber gloves when performing
cleaning procedures.
Using dry cleaning solvent (Item 55, Appendix D) and clean rags, clean all parts.
1.
Check all parts for bends, cracks, wear in holes, and other defects. Replace defective
2.
parts.
Inspect bushings (A) for wear. Replace defective
3.
bushings (A) if damaged.
Examine housing (B) for cracks.
4.
Go on to Sheet 4
TA108054