TM 5-5420-226-20-2
EXHAUST PIPE (LEFT SIDE) REPLACEMENT (Sheet 2 of 4)
REMOVAL:
1.
Using flat-tip screwdriver, loosen screw
(A) holding clamp (B) onto tube (C).
2.
Using socket, remove six nuts (D) holding exhaust pipe (E) to turbosupercharger housing
(F).
3.
Sliding exhaust pipe extension (G) out of tube (C), remove exhaust pipe (E) with insulation
halves (H) and gasket (J) from turbosupercharger housing (F). Throw gasket (J) away.
4.
Using cross-tip screwdriver and 5/16
inch wrench, remove 14 screws (K),
each with two flat washers (L), one
lockwasher (M), and one nut (N) holding
insulation halves (H) to exhaust pipe
(E).
5.
Using flat-tip screwdriver, remove clamp
(P) from packing (Q). Remove packing
(Q) from pipe (E).
6.
Remove insulation halves (H) from exhaust pipe (E).
Go on to Sheet 3
TA107949
8-6