TM 5-5420-226-20-2
REPLACEMENT (Sheet 1 of 1)
TRANSMISSION SHROUD SUPPORTS (LEFT OR RIGHT)
Ratchet with 1/2 in. drive
TOOLS:
9/16 in. socket with 1/2 in. drive
2 in. extension with 1/2 in. drive
Remove transmission shroud assembly (page 9-2).
PRELIMINARY PROCEDURES:
REMOVAL:
Using socket and extension, remove
1.
three screws, washers, and lock-
washers (A) holding (left or right)
supports (B) to hull wall.
Remove supports from vehicle.
2.
INSTALLATION:
Position supports (B) (left or right) on hull wall and attach supports with three screws,
1.
washers, and lockwashers (A).
Using socket and extension, tighten
2.
three screws, washer, and lockwasher (A).
Install transmission shroud assembly (page 9-6).
3.
TA107970
End of Task