TM
5-5420-226-20-2
TRANSMISSION SHROUD SUPPORT REPAIR (Sheet 1 of 6)
PROCEDURE INDEX
PROCEDURE
PAGE
Disassembly
Assembly
Putty knife
TOOLS:
Ratchet with 1/2 in. drive
7/1 6 in. socket with 1/2 in. drive
Cross-tip screwdriver, tip no. 2
Flat-tip screwdriver
SUPPLIES:
Dry cleaning solvent (Item 55, Appendix D)
Silicone adhesive (Item 7, Appendix D)
Rags
Remove shroud supports (page 9-1 5).
PRELIMINARY
PROCEDURE:
DISASSEMBLY:
Using cross-tip screwdriver, remove
1.
four screws (A) and washers (B) holding
retainer (C) to bracket (D).
Using flat-tip screwdriver, remove retainer
2.
(c), seal (E), and retainer (F) from bracket
(D).
Go on to Sheet 2
TA107971