TM 5-5420-226-20-3
ENGINE GENERATOR REGULATOR REPLACEMENT (Sheet 1 of 2)
Spanner wrench
TOOLS:
7/16 in. socket with 1/2 in. drive
Flat-tip screwdriver
Ratchet with 1/2 in.drive
5in. extension with 1/2 in.drive
Remove access cover from floor in commander's
PRELIMINARY PROCEDURE:
compartment (page 17-9)
1. Using spanner wrench, remove two electrical connectors (A) from engine generator
regulator (B).
2. Using screwdriver, remove screw (C) securing ground (D) to engine generator regulator
(B).
3. Remove ground(D) and lockwasher (E) from engine generator regulator (B).
4. Using socket, remove screw(F) and two lockwashers (G) securing ground(D) to hull.
5. Using screwdriver, loosen four screws(H) securing engine generator regulator
(B) to mounting bracket (J).
6. Remove engine generator regulator (B) from vehicle.
Go on to Sheet 2
TA168669
