TM 5-5420-226-20-3
HEADLIGHT STOWAGE LAMPHOLDER REPLACEMENT (Sheet 1 of 1)
7/16 in. combination box and open end wrench
TOOLS:
NOTE
There are two lampholders in the
Removal and
crew compartment.
installation are the same for each
lampholder.
REMOVAL:
1. Using hand, remove dust cap (A) by
turning counter clockwise.
2. Using wrench, remove three screws (B),
lockwashers (C), and flat washers (D).
3. Remove lampholder (E).
INSTALLATION:
1. Place lampholder (E) in position.
2. Using wrench install three screws (B),
lockwashers (C), and flat washer (D).
3. Install dust cap (A) by turning clockwise.
End of Task
TA168838
