TM 5-5420-226 -20-3
DOMELIGHT RESISTOR ASSEMBLY BRACKET REPLACEMENT (Sheet 1 of 1)
TOOLS: 7/16 in. socket with 1/2 in. drive
5 in. extension with 1/2 in. drive
Ratchet with 1/2 in. drive
PRELIMINARY PROCEDURES: Remove resistor assembly (page 10-201)
REMOVAL:
1. Using socket and extension, remove two
screws (A), lockwashers (B), and washers (C).
2. Remove bracket (D).
INSTALLATION:
1. Position bracket holes with holes in domelight
assembly (E).
2. .Place lockwashers (B) and washers (C) on two
screws (A).
3. Insert through holes in positioned parts of step 1.
4. Using socket and extension, tighten screws (A)
5. Install resistor assembly (page 10-202).
End of Task
TA168854
