TM 5-5420-226-20-3
LEFT TAILLIGHT - STOPLIGHT ASSEMBLY REPLACEMENT (Sheet 1 of 3)
TOOLS: 9/16 in. combination box and open end wrench
Silicone compound (Item 32, Appendix D)
SUPPLIES:
1/2 in. masking tape (Item 58, Appendix D)
Remove transmission shroud (page 9-2)
PRELIMINARY PROCEDURES:
REMOVAL:
NOTE
lnspect leads (A) and leads (B) for
numbered tags (C). If leads do not
have tags, use masking tape and
pencil to number leads 21, 22, and
24.
Reach through exhaust door opening and
1.
disconnect three leads (A) from hull con-
nectors (B).
2. Slide three connector shells (D) back on
taillight leads to expose three slotted
washers (E).
NOTE
Lubricant may be needed on leads
(A) to remove shells (D).
3. Remove three slotted washers (E) and three
shells (D).
TA168855
Go on to Sheet 2
