TM 5-5420-226-20-3
SHIFTING CONTROL TO FORWARD INBOARD LINK ASSEMBLY TUBE REPLACEMENT
(Sheet 2 of 5)
REMOVAL:
NOTE
Place shifting rod in position. This will make bolts easier to take out by
moving tube forward.
1.
Using screwdriver, remove six screws
(A) from plate (B) in front of driver's
seat.
2.
Remove plate (B).
Using 9/16 inch wrench, remove two
3.
bolts (C).
Remove tube (D).
4.
Using steel tape, measure center-to-center distance between holes in rod ends (E).
5.
6.
Using pencil and paper, write down center-to-center distance.
TA169028
Go on to Sheet 3
11-27
