TM 5-5420-226-20-3
SHIFTING FORWARD OUTBOARD TUBE REPLACEMENT (Sheet 2 of 4)
REMOVAL:
1.
Using 9/16 inch wrench, remove two
bolts (A) from link (B) and clevis (C).
Remove tube (D).
2.
Using steel tape, measure center-to-
3.
center distance between holes in rod
end (E) and clevis (C).
4.
Using pencil and paper, write down center-to-center distance.
DISASSEMBLY:
Holding rod end (A) with 9/16 inch wrench,
1.
use 9/16 inch wrench to back off nut
(B).
2.
Using 9/16 inch wrench, remove rod
end (A) and nut (B) from tube (C).
INSPECTION:
Inspect rod end (A), nut (B), and tube (C) for wear or damage. Replace if required.
ASSEMBLY:
1.
Manually install nut (B) and rod end (A) on tube (C).
Go on to Sheet 3
TA169033