TM 5-5420-226-20-3
SHIFT LINKAGE ADJUSTMENT (Sheet 12 of 28)
58.
Using 9/16 inch wrench, remove screw (AM).
Using 9/16 inch wrench, adjust shifting
59.
rod bearing end (AL) by turning clockwise
until shifting rod (AH) is past hole (AK).
60.
Using 9/16 inch wrench, install screw (AM).
61.
Holding rod bearing end (AL) with 9/16 inch
wrench, use torque wrench and 9/1 6 inch crow-
foot adapter to tighten jamnut (AE) to 16-18
lb-ft (22-24 Nm).
Using torque wrench and 9/1 6 inch socket,
62.
tighten screw (AM) to 16-18 lb-ft (22-24 Nm).
Using 9/16 inch wrench, adjust shifting rod
63.
bearing end (AG) by turning clockwise or
counterclockwise until screw (AF) will drop
freely through clevis (AC) and shifting rod
bearing end (AG).
64.
Using 9/16 inch wrench, install screw (AM).
Holding rod bearing end (AL) with 9/16 inch wrench, use torque wrench and 9/16 inch
65.
crow foot adapter to tighten jamnut (AE) to 16-18 lb-ft (22-24 Nm).
Remove locating pin (L) from alinement holes.
66.
67.
Using torque wrench and 9/16 inch socket, tighten screw (AF).
TA169065
Go on to Sheet 13
11-64
