TM 5-5420-226-20-3
BRAKE MASTER CYLINDER REPLACEMENT (Sheet 5 of 9)
CLEANING AND INSPECTION:
1.
Inspect stoplight switch (A). Replace
if unserviceable.
Cleaning agent specified is flammable. Use only in well ventilated areas. Keep away from
flames, sparks, or heat. Do not smoke while using. Prevent contact with eves. mouth. and/or
skin. Wear rubber gloves when performing cleaning procedures.
2.
Using clean rags and dry cleaning solvent,
clean all parts which have been removed.
3.
Inspect elbow (B), brake tube assembly (C),
tube reducers (D), line connector nuts (E),.
and push rod (F) for damage, bad threads,
cracks, or excessive wear. Replace if
unserviceable.
4.
Using flat-tip screwdriver, clean groove (G)
on push rod (F). Remove all old adhesive.
Go on to Sheet 6
TA169136
