TM 5-5420-226-20-3
PARKING BRAKE CONTROL ASSEMBLY AND LINKAGE REPLACEMENT (Sheet 17 of 17)
Go to engine compartment.
35.
Using 15/16 inch wrench, install nut (AR)
36.
onto control assembly (A).
Install lockwasher (AS), bracket (AT), and
37.
lockwasher (AU) onto control assembly (A).
38.
Using 15/16 inch wrench, install nut (AV)
onto control assembly (A).
Install new packing (AW) onto brake control
39.
nut (AX).
40.
Using 15/16 inch wrench, install brake control nut (AX) onto control assembly (A).
Using 9/16 inch wrench, install nut (AY) onto control assembly (A).
41.
Using 9/16 inch wrench to hold nut (AY), use adjustable wrench to install connector (AZ)
42.
onto control assembly (A).
Position clamp (BA) onto control assembly (A).
43.
Using 9/16 inch wrench, install screw and lockwasher (BB).
44.
Install powerplant (page 5-14).
45.
Perform parking brake adjustment (page 13-130).
46.
Install operator's floor access cover (page 17-17).
47.
Place transmission shift lever at P (park)
48.
Remove blocks from tracks (TM 5-5420-226-10).
49.
TA169230
End of Task
13-106
