TM 5-5420-226-20-3
EXHAUST DOORS REPLACEMENT(Sheet 2 of 4)
Position crane with hoist
3.
to rear of vehicle.
Wrap sling around door.
4.
Put two end eyes of sling
over hoist hook.
Using hoist, tighten sling
5.
around door.
6.
Using hammer and drift punch,
drive two pins (C) out of
hinges.
Remove two pins (C) and flat washers
7.
(D).
Using pinch bar, pry door away from
8.
hull mounting.
Using hoist and sling, move door to
9.
clean working area.
Repeat steps 2 through 9 for opposite
10.
side of vehicle.
11.
Using 9/16 inch socket with extension, remove
22 assembled flat washers (E) and screws
(F) from right side exhaust door (G) only.
12.
Remove two deflectors (H) from right
side door only.
TA169430
Go on to Sheet 3
16-18
