TM 5-5420-226-20-3
INTAKE GRILLE DOOR NO. 4 LEFT AND RIGHT REPLACEMENT (Sheet 1 of 1)
1-1/8 in. socket with 1/2 in. drive
TOOLS:
Ratchet with 1/2 in. drive
Two
PERSONNEL:
REFERENCE:
Launch bridge (TM 5-5420-226-10)
PRELIMINARY PROCEDURES:
Open No. 5 intake grill
door (TM 5-5420-226-10)
REMOVAL:
1.
Using socket, remove screw (A) and
lockwasher (B) from door (C).
Using second technician, lift door (C) with
2.
handle (D) straight up.
Remove door (C) from vehicle.
3.
Repeat steps 1 through 3 for opposite
4.
s i d e of vehicle.
INSTALLATION:
Using handle (A), lift door (B) above vehicle and slowly lower into place. Make sure
1.
hinge hole (C) indoor (B) alines with hole in vehicle.
Using screw (D) and lockwasher (E), secure door (B) to vehicle. Use socket to tighten
2.
screw (D).
Repeat steps 1 and 2 for opposite side of vehicle.
3.
Close no.5 intake grille doors (TM 5-5420-226-10).
4.
End of Task
