TM 5-5420-226-20-3
FRONT FENDER PLATE NO. 1 REPLACEMENT (Sheet 1of 3)
TOOLS: 9/16 in. combination box and open end wrench
9/16 in. socket with 1/2 in. drive
Ratchet with 1/2 in. drive
Removal and installation procedure is the
same for both left and right sides.
1. Using socket and wrench, remove three screws (A), six washers (B) and three locknuts (C).
2. Using socket, remove two screws (D),
lockwashers (E) and washers (F).
3. Remove support (G).
Go on to Sheet
