TM 5-5420-226-20-3
DOOR ASSEMBLY (ESCAPE HATCH) REPLACEMENT (Sheet 2 of 2)
Rotate handle (B) clockwise.
2.
Lower jack and slide door assembly (A) from
3.
under vehicle.
INSTALLATION:
Rotate handle (B) clockwise and secure with
1.
wire.
Position door assembly (A) on floor
2.
jack.
Position floor jack directly beneath hull opening with door assembly in proper alinement
3.
with hull opening.
Raise door assembly (A) into position.Slight repositioning may be needed to aline door
4.
with hull opening.
Release wire to allow plungers (C) to engage hull lugs.
5.
Make sure plungers (C) fully engage hull lugs.
6.
Make sure seal (D) is fully seated around hull opening.
7.
Make sure handle (B) is in fully closed (counterclockwise) position.
8.
Remove jack.
9.
End of Task
TA169453