TM 5-5420-227-24
PERISCOPE STOWAGE BOXES REPLACEMENT (Sheet 2 of 2)
REMOVAL:
1.
2.
3.
4.
5.
6.
Remove periscope stowage box (C) from
bracket (D).
7.
Using 1/2 inch socket, remove remaining three screws (J) and lockwashers (K) from
clip (L). Throw lockwashers (K) away.
8.
Remove clip (L) from vehicle.
INSTALLATION:
1.
Place periscope stowage box (A) in
position on bracket (B).
2.
Open periscope stowage box (A).
3.
Manually install four screws (C),
eight flat washers (D), four new
lockwashers (E), and four nuts' (F).
4.
Using 9/16 inch wrench to hold
screws (C), use 9/1 6 inch socket
to tighten four nuts(F).
Place clip (G) in position in
5.
vehicle.
6.
Using 1/2 inch socket, install three screws (H) and new lockwashers (J).
7.
Slide bracket (B) with periscope' stowage box (A) into clip (G).
Using 1/2 inch socket, install two screws (K) and new lockwashers (L).
8.
Stow periscopes in stowage boxes (TM 5-5420-226-1 O).
9.
TA170278
End of Task
3-50