TM 5-5420-227-24
SCISSORS CYLINDER HOSE ASSEMBLIES (CF1, CF2, CG, CI, AND CJ) AND HYDRAULICS
REPLACEMENT (Sheet 5 of 12)
25.
Using 9/16 inch socket, remove eight screws
(AJ) and lockwashers (AK). Throw
lockwashers (AK) away.
26.
Remove boom mount hose armor (AL).
NOTE
Two upper hose assemblies are removed
in step 27, to provide clearance for removal
of "CJ" and "Cl".
Holding two elbows (AM) with 12 inch
27.
adjustable wrench, use 1-1/4 inch wrench to
remove hose assemblies (AN) and (AP) from
two elbows (AM).
Holding two elbow assemblies (AQ) with 12
28.
inch adjustable wrench, use 1-1/4 inch
wrench to remove hose assemblies "CJ" (V)
and "Cl" (H) from elbows (AQ).
29.
Using 12 inch adjustable wrench on two
elbows (AQ), use 1-1/4 inch wrench to loosen
elbow nuts (AR).
Using 12 inch adjustable wrench, remove
30.
elbows (AQ), elbow nuts (AR), flat washers
(AS) and preformed packings (AT).
NOTE
Procedure for removal of right side compo-
nents and left side components is identical.
Right side is shown.
31.
Holding elbow (AU) with 12 inch adjustable
wrench, use 12 inch adjustable wrench to
remove elbow (W) from elbow (AU).
32.
Holding elbow (AV) with 12 inch adjustable
wrench, use 12 inch adjustable wrench to
remove elbow (AU) and collar "CF2" (AW)
from elbow (AV).
TA170363
3-137