TM 5-5420-227-24
SCISSORS CYLINDER HOSE ASSEMBLIES (CF1, CF2, CG, Cl, AND CJ) AND HYDRAULICS
REPLACEMENT (Sheet 9 of 12)
NOTE
Collar marked "CF1" goes on left side. Collar
marked "CF2" goes on right side.
Holding elbow (H) with 12 inch adjustable
18.
wrench, use 12 inch adjustable wrench to
install elbow (V) and collar "CF2" (W).
Holding elbow (V) with 12 inch adjustable
19.
wrench, use 12 inch adjustable wrench to
install elbow (X).
Repeat steps 1 through 19 for left side.
20.
Holding elbow (X) with 12 inch adjustable
21.
wrench, use 1-1/4 inch wrench to install
hose assemblies "CF2" (Y) on elbow (X).
MOUNTING
BRACKETS
Manually position relief valve "RV8" (P) and
22.
attached parts between mounting brackets.
23.
Manually install elbow (Z), collar "CF2"
(AA), adapter (AB), and collar "CJ" (AC).
Holding relief valve "RV8" (P) with 15 inch
24.
adjustable wrench, use 12 inch adjustable
wrench to tighten elbow (Z).
Holding bushing (U) with 1-3/8 inch wrench, use 1-1/8 inch wrench to tighten adapter (AB).
25.
Holding elbow (Z) with 12 inch adjustable wrench, use 1 -1/4 inch wrench to install hose
26.
assembly "CF2" (Y) on elbow (Z).
Holding elbow (Q) with 12 inch adjustable wrench, use 1 -1/8 inch wrench to install adapter
27.
(AD) and collar "CG" (AE) onto elbow (Q).
Holding adapter (AD) with 1-1/8 inch wrench, use 1-1/4 inch wrench to install hose
28.
assembly "CG" (AF) on adapter (AD).
TA170367
Go on to Sheet 10
3-141
