TM 5-5420-228-24
FRONT FIXED AND MOVEABLE HOSE ARMOR REPLACEMENT (Sheet 1 of 2)
3/4 in. socket with 1/2 in. drive
TOOLS:
Ratchet with 1/2 in. drive
Slip joint pliers
Hammer
Brass drift
Cotter pins (2 required)
SUPPLIES:
Lockwashers (6 required)
Two
PERSONNEL:
REMOVAL:
1.
Using pliers, remove two cotter pins (A).
2.
Using hammer and brass drift, drive pin (B)
from fixed armor (C) and moveable armor (D).
Remove moveable armor (D) by sliding it upward
3.
until bar comes out of groove of boom and
outrigger assembly (E).
NOTE
Have second technician hold fixed armor
(C) while performing step 4.
Using socket, remove four screws (F) and
4.
lockwashers (G).
Remove fixed armor (C).
5.
TA251531
Go on to Sheet 2