TM 5-5420-228-24
SCISSORS CYLINDER HOSE ASSEMBLIES (CF1, CF2, CG, CI, AND CJ) AND HYDRAULICS
REPLACEMENT (Sheet 1 of 12)
PROCEDURE INDEX
PAGE
PROCEDURE
Removal
Installation
9/16 in. socket with 1/2 in. drive
TOOLS: 12 in. adjustable wrench (2)
Hammer
1-1/4 in. open end wrench (2)
Pliers, long round nose
1/2 in. socket with 1/2 in. drive
Ratchet with 1/2 in. drive
3/8 in. socket with 1/2 in. drive
14 in. pipe wrench
Vise
1-5/16 in. open end wrench
1-1/8 in. open end wrench
1-3/8 in. open end wrench
15 in. adjustable wrench
Lockwashers (2 required)
Pipe tape (Item 19, Appendix D)
SUPPLIES:
Preformed packings (2 required)
Masking tape (Item 18, Appendix D)
Cotter pins (4 required)
Pencil (Item 22, Appendix D)
Rags (Item 12, Appendix D)
Drip pans (suitable containers)
Protective caps and plugs
LO 5-5420-202-12
REFERENCES:
PRELIMINARY PROCEDURE: Relieve hydraulic pressure
NOTE
Use rags and drip pans to catch excess hydraulic fluid. Use
masking tape to tag lines for installation. Cap or plug all lines
TA251537
and fittings as they are disconnected.
Go on to Sheet 2
