TM 5-5420-228-24
PUMP-TO-VALVE BANK HOSE ASSEMBLY (CW) REPLACEMENT (Sheet 1 of 2)
TOOLS: 1-1/2 in. open end wrench
1-5/8 in. open end wrench
12 in. adjustable wrench
1-3/8 in. open end wrench
Pipe tape (Item 19, Appendix D)
SUPPLIES:
Rags (Item 12, Appendix D)
Drip pans (suitable containers)
Protective caps and plugs
LO 5-5420-202-12
REFERENCE:
PRELIMINARY PROCEDURE: Relieve hydraulic pressure (page 3-71)
REMOVAL:
NOTE
Use drip pan and rags to catch excess
hydraulic fluid. Cap or plug all lines and
fittings as they are disconnected.
1.
Using fingers, disconnect quick
disconnect socket (A).
Using 1-1/2 inch wrench, remove hose
2.
assembly "CW" (B) from elbow (C).
Using adjustable wrench, remove elbow
3.
(C) and collar (D) from valve bank (E).
Go on to Sheet 2
TA251757